• Economical Hangers

    Economical Hangers are fabricated of 20 gauge galvanized steel, which is stronger than most competitors. They are perfect for lighter duty applications. Hangers are 1" wide. One hanger is required for every 10 feet of main duct, and at least one on each 10 foot branch or less.
  • Hangers – Single Rod

    Single Rod Hangers are designed to hang from a threaded single rod (Clearance for 3/8" rod) and fit loose around pipe. Fabricated of 22 gauge galvanized steel. One hanger is required for every 10 feet of main duct, and at least one on each 10 foot of branch or less.
  • Heavy-Duty Hangers

    Heavy-Duty Hangers:3"- 8" Fabricated of 18-gauge steel 9"-10" Fabricated of 16-gauge steel 12"-24" Fabricated of 12-gauge steelAll Heavy-Duty Hangers are 1" wide. One Hanger is re­quired for every 10 feet of main duct, and at least one on each 10 foot branch or less. Hang­ers come with nuts, 5/16" bolts, and washers.Can be installed with strapping or threaded rod.Other sizes available, call for pricing.
  • DYNA-TITE CABLE LOCK is a hanging solution for spiral pipe. The newest fastest and most reliable way to secure equipment, reducing installation labor. A fast, strong, lightweight solution. The anti-corrosion housing has a stainless steel spring that holds the serrated teeth locking wedges against the 3/16 galvanized wire rope. There is a cable release pin for easy adjustment. The working weight load limit per 3/16 wire rope and Cable Lock is 640 lbs. with a 5 to 1 safety factor before breaking. These specifications apply only to Duro-Dyne/Cooper-Campbell Cable.Click here for Tech Data on Cable Locks and Cables
  • Hanger Strapping

    STRAP100 - Convenient strap for hanging ductwork. 100-foot roll of heavy 16-gauge galvanized steel hanger strapping, 1" wide. Convenient carrying handle in box makes it easy to dispense. Perfect for small to large installations. No wasted material. Weight per box 22 lbs. Easily shipped by UPS or FedEx Ground. To install, simply cut to length, locate and drill hole for hanging.STRAP25 - Easily make your own hangers from our Light Duty Hanger Strapping, a 25-foot roll made of 20 gauge galvanized steel, 3/4" wide. Hanger strap contains continuous perforated holes for easy bolting and/or nailing where needed. Locate hanger every 10 feet. Recommended for hanging 22 gauge spiral pipe up to 6" in diameter. Simply cut strip to length, leaving enough material to hang from ceiling or attach to wall. Form by hand to desired pipe size. You can get up to six hangers per roll depending on your cut length.STRAP5 - Hanger strapping is used with heavy-duty hangers and economical hangers. To install, attach a hanger approximately every ten feet on spiral pipe system and run strapping from hangers to a safe structural location. Each piece is 5 feet long, 16-gauge Galvanized by 1 inch wide. UPS shippable.